Oil Based Epoxy Self-Leveling Flat Coating High Light

Oil Based Epoxy Self-Leveling Flat Coating High Light

Diluting materials: Oil-based epoxy self-leveling paint needs to be diluted with matching epoxy diluents (such as Tianna water). This type of diluent is volatile and has a pungent odor.

‌Environmental performance: A large amount of harmful substances will be added to oil-based epoxy self-leveling paint during production and construction, which is easy to cause harm to the environment and human health, so the environmental performance is poor.

‌Drying time: Since the diluent is volatile, oil-based epoxy self-leveling paint can generally dry in 6-12 hours.

‌Fireproof performance: Oil-based epoxy self-leveling paint is a flammable and explosive hazardous chemical. Open flames must be avoided during production, transportation and use, which poses a safety hazard.

‌Packaging material: Due to its certain corrosiveness, oil-based epoxy self-leveling paint is usually packaged in iron barrels.

‌Physical properties: The hardness of oil-based epoxy self-leveling paint can reach 2.2H, the acid and alkali resistance is 10%, the yellowing time is short, and the water blister resistance is poor.

‌Application range‌: Due to its poor environmental performance, oily epoxy self-leveling paint is generally used in construction sites where no one lives or there are few people around, and its application range is relatively narrow‌.

‌Cost‌: The price of oily epoxy self-leveling paint is relatively high, but the price of its topcoat is relatively low‌.

Construction process and construction requirements

The construction process of oily epoxy self-leveling paint includes the following steps:

‌Base floor treatment‌: After testing that the concrete strength meets the standard, use a floor-specific grinder to grind the floor to ensure that the floor is dust-free and free of foreign matter.

‌Base coating construction‌: Use two-component epoxy primer for mixing and apply it to the treated floor.

‌Middle coating mortar layer construction‌: Add quartz sand and quartz powder, mix evenly, and then apply it to the dried base coating.

‌Mortar layer grinding treatment‌: Use a grinder to grind the dried mortar layer to ensure a smooth surface.

‌Putty layer construction‌: Use epoxy self-leveling paint to mix and apply it to the treated mortar layer.

‌Top coating construction‌: Finally, use epoxy self-leveling flat paint ingredients and brush it on the dried putty layer‌